Tag: training electrical pasti running

TRAINING BASIC ELECTRICAL FOR NON ELECTRICIAN

4dm1n

TRAINING BASIC ELECTRICAL FOR NON ELECTRICIAN

Training Electrical

Training Pengetahuan Kelistrika

training electrical murah

TRAINING OBJECTIVES :
Tujuan dari training ini adalah untuk menambah wawasan mengenai konsep dasar sistem kelistrikan. Pelatihan ditekankan pada pemahaman mengenai aspek pemanfaatan energi listrik, penggunaan peralatan-peralatan listrik serta aspek keselamatan dalam pemanfaatan sistem kelistrikan. Dengan demikian setelah mengikuti pelatihan ini peserta akan dapat :
1. Memahami hukum-hukum Dasar kelistrikan
2. Memahami mengenai konfigurasi jaringan Tenaga Listrik dari pembangkitan hingga pemanfaatan
3. Memahami cara melakukan perhitungan biaya penggunaan energi
4. Memahami prinsip kerja, instalasi dan penggunaan mesin-mesin listrik
5. Memahami mengenai aspek-aspek keselamatan dalam sistem kelistrikan
6. Memahami cara memproteksi peralatan listrik

TRAINING MATERIAL OUTLINE :
1. Basic Electrical Concepts & Definitions
+ System overview,
+ Elements of Electrical Power System,
+ per-unit System
2. Electrical Cost Calculation & Evaluation
3. Electrical Distribution Systems
+ Electrical Power System Configuration,
+ Electrical Distribution Network,
+ Distribution Panel
4. Electrical Machines
+ Electrical Motor Fundamental,
+ Motor Starting and Braking,
+ Motor Protection
5. Electrical Safety
+ Basic Safety Concepts,
+ Electrical Hazards,
+ Safe Operation
6. Grounding System
+ Purpose of Grounding,,
+ Standards (National/IEEE/IEC),
+ Grounded vs. Ungrounded,
+ Distribution Grounding Electrodes
7. Overcurrent Protection
+ Need for protection,
+ Types of fault and Calculation ,
+ Over current protection devices characteristics,
+ Application to Industrial Electrical Utilities protection
+ Application to line protection
8. Power Quality
+ Types of disturbances,
+ Harmonics Sources,
+ Harmonics Mitigation
9. Cases Study and Practices
10. Interactive Discussion

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI?
Pelatihan ini diberikan pada para non-electrical engineer, teknisi, operator maupun supervisor yang bekerja dan bertanggung jawab terhadap pekerjaan bidang ketenaga listrikan di industry, bangunan maupun manufaktur. Dan atau semua pihak yang ingin memahami hal-hal yang terkait dengan kelistrikan.

Pembicara / Fasilitator
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Jadwal Pelatihan trainingterbaru Tahun 2026 :

  • Batch 1 : 7 – 8 Januari 2026
  • Batch 2 : 11 – 12 Februari 2026
  • Batch 3 : 4 – 5 Maret 2026
  • Batch 4 : 8 – 9 April 2026
  • Batch 5 : 6 – 7 Mei 2026
  • Batch 6 : 10 – 11 Juni 2026
  • Batch 7 : 8 – 9 Juli 2026
  • Batch 8 : 5 – 6 Agustus 2026
  • Batch 9 : 9 – 10 September 2026
  • Batch 10 : 14 – 15 Oktober 2026
  • Batch 11 : 4 – 5 November 2026
  • Batch 12 : 2 – 3 Desember 2026

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. training accounting, taxation and auditing at coal for oil and gas industry terupdate

Biaya dan Lokasi Pelatihan : training accounting, taxation and auditing at coal for oil and gas industry terupdate

Lokasi : training akuntansi untuk migas terbaru

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.
  • Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .
  • Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .
  • Malang: Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .
  • Lombok: Favehotel, Novotel Lombok, D Praya Hotel .

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. training akuntansi pertambangan umum terupdate

Investasi Pelatihan Training Terbaru : training akuntansi untuk migas mura

  1. Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan Training Terbaru :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk .
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training) .
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner.
  9. Souvenir .

TRAINING BASIC ELECTRICAL

4dm1n

TRAINING BASIC ELECTRICAL

Training Pengetahuan Dasar Kelistrikan

Training Electrical

training pengetahuan dasar kelistrikan murah

TUJUAN TRAINING :
Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan tentang dasar-dasar kelistrikan dan pemeliharaan utilitas listrik di industri. Topik pelatihan ditekankan instalasi, trouble shooting dan pemeliharaan utilitas.

CAKUPAN MATERI TRAINING :
1. Basic Electricity
* Electric quantities
* Ohm’s Law
* Kirchoff’s Law

2. AC Voltage Generation
* Induced AC Voltage
* rotating magnetic field
* frequency
* voltage and current sine wave
* peak value
* RMS value

3. Properties of AC Circuits
* Resistive
* Inductive and capasitive loads
* phasor diagram

4. Impedance and Voltage Drop
* Voltage drop across individual elements
* Impedance triangle
* voltage drop across line

5. Power and Power Factor
* Energy and active power
* reactive power
* apparent power
* power factor
* power triangle

6. Power Factor Correction
* Individual and group PFC

7. Three Phase Power Systems
* Three phase generation,common neutral
* Balanced three phase load, three phase equipment
* Characteristics of Y/D connections, Three-phase power

8. Electrical machines
* DC-Machines
* AC-Machines

9. Motor Installation
* installation & wiring of contactors
* Types of motor starters
* Motor & circuit protection

10. Mechanical-Electrical Rotating Equipment Maintenance

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Pelatihan ini diberikan pada para teknisi, operator maupun supervisor yang bekerja dibidang ketenaga listrikan di industri untuk mampu memahami secara komprehensif masalah ketenagalistrikan, instalasi dan pemeliharaan utilitas.

Trainer
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Jadwal Pelatihan trainingterbaru Tahun 2026 :

  • Batch 1 : 7 – 8 Januari 2026
  • Batch 2 : 11 – 12 Februari 2026
  • Batch 3 : 4 – 5 Maret 2026
  • Batch 4 : 8 – 9 April 2026
  • Batch 5 : 6 – 7 Mei 2026
  • Batch 6 : 10 – 11 Juni 2026
  • Batch 7 : 8 – 9 Juli 2026
  • Batch 8 : 5 – 6 Agustus 2026
  • Batch 9 : 9 – 10 September 2026
  • Batch 10 : 14 – 15 Oktober 2026
  • Batch 11 : 4 – 5 November 2026
  • Batch 12 : 2 – 3 Desember 2026

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. training accounting, taxation and auditing at coal for oil and gas industry terupdate

Biaya dan Lokasi Pelatihan : training accounting, taxation and auditing at coal for oil and gas industry terupdate

Lokasi : training akuntansi untuk migas terbaru

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.
  • Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .
  • Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .
  • Malang: Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .
  • Lombok: Favehotel, Novotel Lombok, D Praya Hotel .

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. training akuntansi pertambangan umum terupdate

Investasi Pelatihan Training Terbaru : training akuntansi untuk migas mura

  1. Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan Training Terbaru :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk .
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training) .
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner.
  9. Souvenir .

TRAINING AC DC MOTOR LISTRIK

4dm1n

TRAINING AC DC MOTOR LISTRIK

Training Ac/Dc Electrical Motor

Training Motor

training ac/dc electrical motor murah

AC/DC ELECTRICAL MOTOR

Deskripsi

This course covers AC/DC electrical motor drives for speed/position control.  It presents an integrated discussion of AC/DC electric motor, power electronics, and control systems. Applications of electric drives can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of AC/DC electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot AC/DC electrical motors drives. The course focuses on the dc and ac motor from solid state converters for better torque and speed response. Advanced control techniques are applied to optimize the performance of dc/ac motor drives. Since majority of modern drives are dc/ac motor drives, the course centers around the control of dc/ac motor drives.

Participant will gain a fundamental understanding of the  AC/DC electrical motor drives, installation, operation and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life.  Finally, control aspects of some special motors, such as permanent magnet synchronous motor, brushless dc motor, switched reluctance motor, etc. Computer simulations are used for understanding AC/DC electric motor, power-electronics based converters and the design of control systems.

Tujuan

After successfully completing this course, Participants will able to do the following:
1. Understand the AC/DC electrical motor drives basic principles
2. Describe the Electric Drive systems and various applications such as flexible production systems, industries, transportation, robotics and process control.
3. Understand the principle on AC/DC electrical motor.
4. Understand the basic principles of power electronics in drives using switch-mode converters and pulse width modulation.
5. Design torque, speed, and position controllers of motor drives.
6. Explain operating principles, major components and control logic used with AC and DC drive speed controls.
7. Learn the stepper motors and switched-reluctance motor drives.
8. Get an appreciation of power quality issues in powering electric drives.
9. Compare the advantages and disadvantages of AC DC drives based on application.
10. Discuss the advantages of using variable speed drives in constant torque and variable horsepower loads.
11. Understand the Troubleshoot  of AC/DC electrical motor drives.

Materi

1. Introduction to AC/DC electrical motor drives.
2. Basic principles of electro-mechanical energy conversion (Efficiency, torque, inertia, horsepower/power factor, Torque-speed curves)
3. Principles of AC electrical motor ( operating system and control )
4. Principles of DC electrical motor ( operating system and control )
5. Basic understanding of switch-mode power electronic converters in electric drives.
6. DC-motor drives and electronically-commutated motor drives.
7. DC motor drives  (Speed-torque characteristics DC shunt,  series, Speed and position control methods )
8. Designing feedback controllers for motor drives.
9. Introduction to AC machines.( Induction-synchronous motors )
10. Induction-motor drives: speed control.
11. Vector control of induction-motor drives.
12. Reluctance drives: stepper-motor and switched-reluctance drives.
13. Energy efficiency of electric drives and inverter-motor interactions.
14. Powering electric drives: power quality issues.
15. Ancillary issues in drives: sensors and  controllers.
16. Converters and control ( Phase controlled converters,  Four quadrant operation Choppers,  AC to DC converters)
17. Inverters and PWM techniques
18. Voltage source inverters, current source inverters and  PWM techniques
19. Power Quality issue: Harmonic elimination
20. Advance induction motor control (constant flux speed control ,vector control )
21. Troubleshoot AC/DC electrical motor drives

Metode

1. Presentation
2. Simulation
3. Animation
4. Video
5. Software support
6. Discuses
7. Case study

Instruktur

Tugino, ST MT & Team

Jadwal Pelatihan trainingterbaru Tahun 2026 :

  • Batch 1 : 7 – 8 Januari 2026
  • Batch 2 : 11 – 12 Februari 2026
  • Batch 3 : 4 – 5 Maret 2026
  • Batch 4 : 8 – 9 April 2026
  • Batch 5 : 6 – 7 Mei 2026
  • Batch 6 : 10 – 11 Juni 2026
  • Batch 7 : 8 – 9 Juli 2026
  • Batch 8 : 5 – 6 Agustus 2026
  • Batch 9 : 9 – 10 September 2026
  • Batch 10 : 14 – 15 Oktober 2026
  • Batch 11 : 4 – 5 November 2026
  • Batch 12 : 2 – 3 Desember 2026

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. training accounting, taxation and auditing at coal for oil and gas industry terupdate

Biaya dan Lokasi Pelatihan : training accounting, taxation and auditing at coal for oil and gas industry terupdate

Lokasi : training akuntansi untuk migas terbaru

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.
  • Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .
  • Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .
  • Malang: Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .
  • Lombok: Favehotel, Novotel Lombok, D Praya Hotel .

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. training akuntansi pertambangan umum terupdate

Investasi Pelatihan Training Terbaru : training akuntansi untuk migas mura

  1. Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan Training Terbaru :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk .
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training) .
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner.
  9. Souvenir .

TRAINING MOTOR LISTRIK LANJUT

4dm1n

TRAINING MOTOR LISTRIK LANJUT

Training Advanced Electrical Motor

Training Electrical

training advanced electrical motor murah

ADVANCED ELECTRICAL MOTOR

Deskripsi

This training is designed to give knowledge and skill on operation, maintenance, protection, control, troubleshooting and Failure of electric motor that many used in industries. Electrical motors are the “workhorses” of industry and are the most widely used electrical machines. Applications of electrical motor can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of  electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot electrical motors. This course also covers electrical motor starting and speed control . Reliability-based maintenance (RBM) and condition-based maintenance (CBM) strategies are now widely used by industry, and health monitoring of electrical motor and drives.  Motor current signature analysis (MCSA) use to diagnose faults in induction motor drives.  MCSA is a noninvasive, online monitoring technique for the
diagnosis of problems in induction motors. Participant will gain a fundamental understanding of the  electrical motor, installation, operation, maintenance, failure  and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure motors are protected against fault conditions, so as to ensure reliability and long life.  Computer simulations are used for understanding of electrical motor operation, maintenance, failure  and troubleshooting.

Tujuan

After successfully completing this course, Participants will able to do the following:
1. Understand the electrical motor basic principles
2. Understand the operation, maintenance, protection, control, troubleshooting and Failure  of electrical motor
3. Describe the failure analysis of electrical motor and the solutions.
4. Understand the Troubleshooting of failure of electrical motor.

Materi

1. Introduction to electrical motor (Fundamental Concepts, AC and DC Motor).

2. Types Of Electric Motors ( Induction Motors, Synchronized Motor, Shunt, Series and Compound Reinforcement)

3. Elektrical motor  operating system and starting control

4. Elektricalmotor: speed control

5. Protection of Electric Motor During Starting, Running and Braking

6. Maintenance of Electric Motor

7. Energy efficiency of electrical motor.

8. Power Quality issue: Harmonic elimination

9. Troubleshoot of electrical motor

10. Failure Analysis And Repair of electrical motor.

11.Condition monitoring for lectrical motor system

12. Causes and effects of: broken rotor bars, abnormal airgap eccentricity, shorted turns in stator windings, shaft/coupling misalignment, stator core vibration characteristics and problems

13. Interrelationshp between current and vibration monitoring to detect the root cause analysis (RCA) of problem

14. Fundamentalson current signature analysis of motor to detectelectrical motor problem.

15. Prediction of fault severity: reliability and limitations

16. Case histories from a range of industries

17. Diagnosis of mechanical problems of electrical motor

18. Computer simulations are used for electrical motor operation, maintenance, failure  and troubleshooting.

Metode :

*    Presentation
*    Simulation
*    Animation
*    Video
*    Software support
*    Discuses
*    Case study

Instruktur

Tugino, ST MT & Team

Jadwal Pelatihan trainingterbaru Tahun 2026 :

  • Batch 1 : 7 – 8 Januari 2026
  • Batch 2 : 11 – 12 Februari 2026
  • Batch 3 : 4 – 5 Maret 2026
  • Batch 4 : 8 – 9 April 2026
  • Batch 5 : 6 – 7 Mei 2026
  • Batch 6 : 10 – 11 Juni 2026
  • Batch 7 : 8 – 9 Juli 2026
  • Batch 8 : 5 – 6 Agustus 2026
  • Batch 9 : 9 – 10 September 2026
  • Batch 10 : 14 – 15 Oktober 2026
  • Batch 11 : 4 – 5 November 2026
  • Batch 12 : 2 – 3 Desember 2026

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. training accounting, taxation and auditing at coal for oil and gas industry terupdate

Biaya dan Lokasi Pelatihan : training accounting, taxation and auditing at coal for oil and gas industry terupdate

Lokasi : training akuntansi untuk migas terbaru

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.
  • Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .
  • Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .
  • Malang: Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .
  • Lombok: Favehotel, Novotel Lombok, D Praya Hotel .

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. training akuntansi pertambangan umum terupdate

Investasi Pelatihan Training Terbaru : training akuntansi untuk migas mura

  1. Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan Training Terbaru :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk .
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training) .
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner.
  9. Souvenir .

TRAINING DASAR MEKANIK LISTRIK PLUMBING

4dm1n

TRAINING DASAR MEKANIK LISTRIK PLUMBING

Training Basic Mechanical Electrical Plumbing

Training Mechanical

training basic mechanical electrical plumbing murah

BASIC MEP (MECHANICAL-ELECTRICAL-PLUMBING)

Deskripsi

MEP Engineer adalah klasifikasi profesional single-level yang bertanggung jawab untuk perencanaan dan desain di bidang mekanik , listrik , dan pipa ( MEP ) sistem termasuk mengembangkan kebijakan , standar , prosedur pemeriksaan , dan alat evaluasi untuk hal-hal yang melibatkan fasilitas MEP cabang yudisial . Dapat mempersiapkan dengan mapan dan akan meninjau gambar , spesifikasi , dan perkiraan biaya untuk sistem mekanik , listrik , dan / atau pipa di fasilitas cabang yudisial .

Materi

1. Dasar –dasar MVAC (Mechanical Ventilation Air Conditioner):

* Matter, Energy & Heat Basics
* Refrigeration Process
* Unit Location & the Air-Distribution System
* Indoor Air Quality
* Electric Heating
* Gas Furnaces
* Heat Pumps

1. Sistem Elektrikal
2. Sistem Penanggulangan Kebakaran
3. Sistem Elektronik
4. Sistem Plumbing
5. Sistem AC
6. Sistem Tranportasi Vertikal

* Sistem Distribusi Daya Listrik.
* Transformator Distribusi.
* Panel Tegangan Menengah
* Penerangan & Kotak Kontak

* APAR (Fire Extinguisher)
* Hydrant
* Gas
* Sprinkler

* Sound Sytem
* PABX
* Fire Alarm
* CCTV
* Jaringan Komputer
* MATV

* Sistem Penyediaan Air Bersih
* Sistem Air Buangan
* Sistem Venting

* Sistem Splite
* Sistem Central

* Elevator
* Escalator

1.

Metode :

Presentation

Discussion

Case Study

Peserta

Training ini cocok untuk diikuti oleh para eksekutif dan manajer unit bisnis strategis dan penanggung jawab kasa atau kredit.

Instruktur

Tugino ST MT and team

Jadwal Pelatihan trainingterbaru Tahun 2026 :

  • Batch 1 : 7 – 8 Januari 2026
  • Batch 2 : 11 – 12 Februari 2026
  • Batch 3 : 4 – 5 Maret 2026
  • Batch 4 : 8 – 9 April 2026
  • Batch 5 : 6 – 7 Mei 2026
  • Batch 6 : 10 – 11 Juni 2026
  • Batch 7 : 8 – 9 Juli 2026
  • Batch 8 : 5 – 6 Agustus 2026
  • Batch 9 : 9 – 10 September 2026
  • Batch 10 : 14 – 15 Oktober 2026
  • Batch 11 : 4 – 5 November 2026
  • Batch 12 : 2 – 3 Desember 2026

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. training accounting, taxation and auditing at coal for oil and gas industry terupdate

Biaya dan Lokasi Pelatihan : training accounting, taxation and auditing at coal for oil and gas industry terupdate

Lokasi : training akuntansi untuk migas terbaru

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.
  • Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .
  • Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .
  • Malang: Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .
  • Lombok: Favehotel, Novotel Lombok, D Praya Hotel .

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. training akuntansi pertambangan umum terupdate

Investasi Pelatihan Training Terbaru : training akuntansi untuk migas mura

  1. Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan Training Terbaru :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk .
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training) .
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner.
  9. Souvenir .