TRAINING OIL AND GAS PROCESSING PLANT DESIGN AND OPERATIONS

Training Desain Pertumbuhan Proses Migas Dan Operasi

Training Pengenalan Oil And Gas Processing Plant

DESCRIPTION  TRAINING OIL AND GAS PROCESSING PLANT DESIGN AND OPERATIONS

Pelatihan ini bertujuan untuk memberikan pengetahuan dan pemahaman tentang rancangan (design), dan operasi dari plant pemrosesan minyak dan gas. Pelatihan akan diawali dengan pembahasan mengenai sifat dan karakteristik dari hydrocarbon sebagai komponen utama penyusun minyak dan gas. Selanjutnya akan dilakukan overview terhadap proses atau operasi yang digunakan dalam pengolahan minyak dan gas. Berdasarkan pengetahuan dan pemahaman tentang sifat dan karakteristik minyak/gas dan proses atau operasi yang digunakan dalam pengolahan gas tersebut, maka pembahasan mengenai rancangan (design) dapat dilakukan. Dalam pelatihan ini, selain metode pemaparan, akan banyak dilakukan diskusi dan latihan-latihan perhitungan, sehingga peserta akan lebih banyak aktif. Beberapa software yang diperlukan dalam design juga akan digunakan dalam pelatihan ini, dan peserta diharapkan untuk aktif berlatih. Secara umum, setelah mengikuti pelatihan ini, peserta diharapkan akan mendapatkan tambahan pengetahuan dan pemahaman
tentang proses atau operasi serta rancangan (design) dalam pengolahan minyak dan gas.

OUTLINE TRAINING OIL AND GAS PROCESSING PLANT DESIGN AND OPERATIONS

1.    Introduction to Oil and Gas Processing Plant Design and Operations
2.    Hydrocarbon Properties & Characteristics
* molecular weight,
* heat of combustion,
* heat of vaporization, etc

3.    Oil and Gas Specification
* LNG,
* LPG,
* condensate,
* gasoline, kerosene, etc

4.    Crude Oil Separation
* oil-gas-water separation,
* KO drum, etc

5.    Oil and Gas Conditioning
* sweetening,
* dehydration

6.    Refrigeration
* Refrigerant cycle,
* refrigeration and throttling,
* work fluids,
* phase diagram,
* refrigerant selection

7.    Oil & Gas Fractionation/Distillation
* vapor-liquid equilibrium,
* vapor pressure,
* partial pressure concept,
* plate column

8.    Heat Exchanger
* heat transfer,
* double pipe,
* shell & tube,
* plate heat exchanger,
* energy calculation and audit in heat exchanger

9.    Process Design Manual and using Software
* design calculation,
* McCabe & Thiele for fractionation design, etc

10.    Discussion and Case Study.

INSTRUCTOR :

Ir. In Jumanda Kasdadi, MT. and Team

Ir. In Jumanda Kasdadi, MT is graduated from Chemical Engineering Bandung Institute of Technology (ITB)and now he is lecturer at chemical engineering poltek ITB (Polban).  Ir. In Jumanda Kasdadi, MT has experienced to be instructors at industrial training more than 15 years, both either  inhouse training or public training. Trainings that delivered by him for many companies  such as for oil and gas, for mining, for manufacture and etc. held in some cities in Indonesia like Jakarta, Bandung, Batam and others.

Beside training, Ir.Injumanda Kasdadi,MT also have experiences at some professional engineering working such as:
* Risk Assessment at oil & gas
* project of Processing at process design
* Facility for waste handling
* Piping and feasibility study of pipeline in onshore and offshore
* And others

This much valuable experiences will be shared to participants in training class.