TRAINING PROGRAMMABLE LOGIC CONTROLLER PLC USING ALLEN BRADLY LOGIX 5000
Training Maintenance And Technical Services Personnel
Training Programmable Logic Controller Applications
DESCRIPTION
PLC training is designed to instruct electrical control professionals on how to successfully integrate a PLC into actual day-to-day industial electrical processes. It not only deals with the hardware and software, but all the surrounding systems that must be compatible to achieve a safe and reliable control system.
PLC training is also designed to help delegates keep abreast of the latest PLC technologies and techniques available in this area, this tutorial offers an excellent opportunity for delegates to ask specific questions and exchange ideas relating to their own applications.
OBJECTIVE
The course is for technicians and engineers, who have little or no Logix 5000 PLC programming and application experience, who are required to make changes to existing Logix 5000 programs. Programming theory is kept to a minimum; the course is hands on with great emphasis on the practical aspects of Programmable Logic Controller applications. The course is based around CompactLogix range of PLCs and RSLogix 5000 software; however, it is suitable as a general introduction to PLCs. The course is run using RSLogix 5000 software and may be customised to include functions relevant to your control applications.
INTRODUCTION
This section will begin with a discussion of basic theory of operation and how it is used to control a process. It will also identify potential applications and relate how PLC control compares with traditional methods of control. A discussion of the benefits of PLC control will follow.
Hardware Configuration
This section will describe the various components used in the formulation of a PLC control system. Included will be methods to select the correct features and capabilities to match the process requirements.
CPU sizes and types
Backplanes
Power supplies
I/O module types
Installation and Wiring Considerations
There are necessary steps that must be taken to ensure that the control system will be correctly installed to provide safe and reliable operation. Installation recommendations and techniques will be given for the following:
Power and grounding
Enclosures
Input devices and wiring methods
Output devices and wiring methods
Programming
Various types of programming software will be introduced to the delegates. Techniques for simple program development and downloading will be demonstrated. Topics will include:
RSLogix 5000 programming
Software Tag Based addressing
Controller Tags
Program Tags
Base Tags
Alias Tags
Data Types
Tags Scope
Tasks
Main Routine
Sub Routine
System I/O Configuration
Communicating with the PLC
Downloading and Uploading PLC programs
Monitoring PLC programs
PLC Programming (Inputs/outputs Timers Counters, stc)
Application Functions
Commenting of programs
Monitoring techniques
Fault finding and searching
Testing and forcing techniques
WHO SHOULD ATTEND
PLC Engineering and design personnel
Maintenance and technical services personnel
Process and operations personnel
Technical and process managers
Engineering and design personnel
Electrical consulting engineers
Electrical contractors
INSTRUKTUR
Tito Yuwono, ST, MT. & Team
Expert in automation system and PLC
METHOD
1. Presentation
2. Discuss
3. Case Study
4. Evaluation
Jadwal Pelatihan trainingterbaru Tahun 2023 :
- Batch 1 : 23 – 25 Januari 2024
- Batch 2 : 6 – 8 Februari 2024
- Batch 3 : 5 – 7 Maret 2024
- Batch 4 : 23 – 25 April 2024
- Batch 5 : 6 – 8 Mei 2024 || 20 – 22 Mei 2024
- Batch 6 : 11 – 13 Juni 2024
- Batch 7 : 16 – 18 Juli 2024
- Batch 8 : 20 – 22 Agustus 2024
- Batch 9 : 17 – 19 September 2024
- Batch 10 : 8 – 10 Oktober 2024 || 22 – 24 Oktober 2024
- Batch 11 : 5 – 7 November 2024 || 19 – 21 November 2024
- Batch 12 : 10 – 12 Desember 2024
Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. training accounting, taxation and auditing at coal for oil and gas industry terupdate
Biaya dan Lokasi Pelatihan : training accounting, taxation and auditing at coal for oil and gas industry terupdate
Lokasi : training akuntansi untuk migas terbaru
- Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.
- Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.
- Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .
- Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .
- Malang: Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .
- Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .
- Lombok: Favehotel, Novotel Lombok, D Praya Hotel .
Catatan : Biaya diatas belum termasuk akomodasi/penginapan. training akuntansi pertambangan umum terupdate
Investasi Pelatihan Training Terbaru : training akuntansi untuk migas mura
- Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
- Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan Training Terbaru :
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Akomodasi Peserta ke tempat pelatihan .
- Module / Handout
- FREE Flashdisk .
- Sertifikat
- FREE Bag or bagpackers (Tas Training) .
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner.
- Souvenir .